Checkingtime Brand Clock Repair Tools

Clock Repair Tools
Sort By:  
Grandfather / Multi Clock Test Stand - Clock Repair Tool
>Holds4 movements at one time!
  • Eachposition has Adjustable slides for different depth movements
  • The standhas adjustable feet so it may be leveled and therefore all of themovements on the stand are also level while being tested.
  • You caneven test Grandfather clock movements while leaving the seat boardattached which is required on some cable movements.
  • Canbe used free standing orattached to the wall for addedstability. (Mount included)
  • Sturdyaluminum construction.
  • ShipsUPS Ground.
  • Someassembly required.
  • No other stand like it on the market.
  • Made in the USA!

If you do as many clocks as I do, you don't have time to wait for a stand to become available. Test four movements or clocks at one time. Holds most complete cuckoo clocks as well!

There is just nothing like it on the market today.

  • This stand will last a lifetime and then some!
Teach your kids the trade and you will be able to pass this professional grade stand on to them for their lifetime as well!

Run-In Movement Test Stand - Clock Repair Tool
Checkingtime.com is offering this redesigned stand which is more functional and much more versatile.
    • This stand tilts so that you may regulate the beat once the movement is in place.
    • 24" Height for greater clearance.
    • Four leg bench stand for greater stability.
    • Anodized for long life.
    • Handles Alarm clocks to Grandfather Clock movements.
    • It is Quick, Easy and more versatile than any other stand you may use!
    • Use the Bench mount clamp for very long drops and weighted clocks. Clamps to the workbench edge.No drilling or screws needed! Also Included!
  • Shown with the optional Cuckoo Clock fixtures, NO INCLUDED.
    Arbor Tool - Clock Repair Tool
    This is a great clock repair tool. This clock repair tool enables the clock repair person to now fully service each arbor. First you can check to see if an arbor or pivot is bent.
    If it is bent you can now straighten the arbor or even the pivots. This is a great time saver if you have ever had a clock that runs erratically.

    Next it enables you to pull the clock lantern cap and service all of the lantern wires without drilling. No more unsightly soldering. Of course it is designed to press the lantern cap easily back in position.

    Features:

      This is a NEW clock repair tool.

      Detects and straightens bent clock arbors and pivots.

      Pulls the clock lantern pinion caps

      Presses clock lantern pinion caps back into place.

      Anodized Aluminum construction for a long life and resists corrosion.

      Handles clock wheels up to 3 3/4" in diameter, arbors up to 6" long.

      Easy to use - Includes detailed instructions.

      Warranted for 1 year against manufacturing and materials defects.

      Made in the USA


      For More information and operating instructions CLICK HERE. You will be redirected to a page on our main web site.

    Cannon Pinion Puller - Clock Repair Tool
    This is one of the latest designs for clock repair. This Clock Repair Tool allows you to pull the "star cam" or "cannon gear" with ease. Accommodates most movements and without bending the hand shaft. In some cases it is helpful to remove certain levers from the front plate. Simply hook the special wires under the gear and turn the large knob and the gear pulls off.

    Use our special Cannon Pinion Punches to reinstall the gear.

    Features:

    • This is a NEW clock repair tool with 1-year warranty!
    • This is simply the best clock repair tool, designed to pull the cannon pinion / star cam gear off of the clock hand shaft without damage.
    • One-piece clock repair tool. No additional parts required for operation. (May require a replacement set of puller wires as they will break after many repeated uses).
    • A quality constructed, anodized aluminum clock tool with comfortable grip knob and stabilizer legs for a sure grip.
    • Works in restricted places, and will pull clock gears that have minimum clearances.
    • Puller comes complete with easy to follow instruction, wrench and replacement wire legs.
    • Use only genuine replacement wire legs.
    • Made in the USA
    Cuckoo Clock Test Fixtures for Run-In-Stand - Clock Repair Tool

    Two Piece Cuckoo Clock Fixture Set

    We are offering these as a set of both the Cuckoo Clock Case Fixture and the Cuckoo Clock Movement Fixture.

    NOTE:

    These are no longer colored but rather in plain aluminum material. This demo set was for clarification only.

    The Cuckoo Clock Case Fixture allows you to place a full cased Cuckoo Clock on the Run-in Stand.

    Once the cased clock is on the stand, you have access to both the front and the back of the clock for final adjustment. The heavy duty yellow rope holds the case firmly to the stand.

    What's more, as the stand has an adjustable tilt, you can level the case on the stand so that you can set the clock beat. Saves lots of time!

    The Base Clamp IS Recommended for this type of service but is not required. This stand is quite sturdy and well balanced for Cuckoo Clock service.

    The Movement fixture easily adjusts for Cuckoo Clock movements with mounting brackets up to 5 1/2" wide and clamps in three different positions to handle various depths of movements.

    It may be used with the bench stand however,  the bench clamp is recommended to allow the weights to travel farther down.

    This is an Accessory for our Run-In-Stand. NOT INCLUDED with the cuckoo fixture

    Dust Barrier for our Run-In-Stand - Clock Repair Tool
    DUST BARRIER Install this accessory on the Run-In Stand and you can keep your clean movement dust free. Includes two mounting brackets and two wires and 3 dust barrier bags. Attaches easily to our run-in stand.  Allows the movement to operate without any interference. Uses standard plastic shopping bags. 
    Cannon Pinion Punch Set - Clock Repair Tool
    This is another clock repair tool available from Checkingtime.com This new clock punch design allows the user to see the position of the clock hand shaft so that is not damaged like the blind hole style of punches. Each punch has a different clock hand shaft capacity. I use these to set other parts such as cams and other gears that need to be set. If you service clocks, this is the right tool for clock repair.

    Features: 

    • Aluminum punches drive cannon pinion / star cam onto center shaft. 

    • 2piece set handles hand shafts up to .220” diameter 

    • Punchescan be used to straighten bent center shafts while still in the clock.

    • Anodized for long life! 

    • Warranted for 1 yearagainst manufacturing and materials defects.
    • Made in the USA!
    Chain Retainer Set of 3 - Clock Repair Tool
    If you service chain driven clocks then these chain retainers will save you time.
    • They comein a set of 3 retainers.
    • Made out of materials that will last for years.
    • Theyare easy to use and hold the chains so that they will not fall off of the sprocket.
    • Made in the USA! 
    Why not buy several sets for each of your tool boxes and your shop.
    Cannon Pinion Puller Replacement Wire Set
    Replacement wires for the Cannon Pinion Puller
    Per Page      1 - 9 of 9
    • 1